Tharollo

Ka khōlo ea theknoloji ea drone le ts'ebeliso ea eona e pharaletseng ho tsa temo, ho tima mollo, lipatlisiso tsa saense, phekolo ea meriana ea tšohanyetso, ts'ireletso ea ts'ireletso le ts'ebetso ea sesole, theknoloji e fetohile pontšo ea bohlokoa ea matla a naha a ts'ireletso ea saense le thekenoloji le naha. Tlas'a semelo sa hajoale sa taolo ea kantle ho naha ea machabeng, lipatlisiso tse ikemetseng le nts'etsopele ea li-drones le ho lemoha ntlafatso ea indasteri ke eona feela tsela ea ntlafatso.

Theknoloji ea UAV e kopanya katleho ea maemo a holimo ho li-composites tsa aerospace, aerodynamics, puisano ea elektronike, taolo ea lifofane, litšoantšo tsa infrared, AI le mahlale a mang. ho ipapisitse le sistimi e phethahetseng ea phepelo ea thepa ea lapeng, re ka fana ka ts'ehetso e latelang ho balekane ba rona:

- ** moralo oa feme **: Theha mohala o felletseng oa Tlhahiso ea UAV, moralo oa ts'ebetso, koetliso ea basebetsi ba mahlale le sistimi ea taolo ea boleng;

- **Tšebeletso ea liteko **: Kopano ea UAV le ho lokisa liphoso, tlhahlobo ea ts'ebetso, le netefatso ea maemo a tikoloho.

- Moralo oa tharollo o hlophisitsoeng;

- Nts'etsopele ea sehlahisoa se secha le ts'ehetso ea ntlafatso e tsoelang pele;

- Theko ea lefats'e bakeng sa lisebelisoa tse tala tsa likhomphutha tsa lifofane, litsamaiso tsa enjine, likarolo tse nepahetseng, jj;

- Tšehetso ea tlhahiso ea lehae le ho theha tšebelisano ea bafani ba thepa.

- Fana ka koetliso ea litsebi ho litsebi tse ipapisitseng le mefuta e fapaneng ea li-drone le lits'ebetso.

- Koetliso ea lifofane: Teko ea sefofane ea mohlala oa sefofane le ho lokisa li-parameter tsa tsamaiso ea sefofane ho tseba mekhoa e fapaneng ea ts'ebeliso.

 

1. Lilemo tse fetang 10 tsa boiphihlelo ba taolo ea tlhahiso;

2. Fektheri ea UAV ea setsebi;

3. Boiphihlelo bo ruileng ho R&D ea tekheniki le tsamaiso ea basebetsi hammoho le sebaka se felletseng sa koetliso le tikoloho.

1. **Tiisetso ea matsete**: Etsa bonnete ba hore matsete a lichelete a lumellana le meputso e lebelletsoeng ka moralo o felletseng;

2. **Tšebelisano e pepeneneng**:Melao-motheo ea ho buleha, toka le toka e sireletsa litokelo / lithahasello tsa mahlakore ka bobeli;

3. **Boikarabello bo hlakileng**:

- Re tsepamisitse maikutlo ho tšehetso ea tekheniki empa ha re nke karolo ho etseng liqeto tsa khoebo ea mokha oa matsete;

- Mokha oa matsete o tlameha ho netefatsa polokeho ea botho, ts'ireletso ea tlhahisoleseling le lekunutu la ts'ebetso ea sehlopha sa tekheniki;

- Mahlakore ka bobeli ka kopanelo a boloka tšehetso ea ts'ebetso bakeng sa ketane ea phepelo le libaka tsa tlhahiso.

Mohato oa Pele: netefatso ea lintlha, ho saena tumellano le chelete ea ho qala (matsatsi a 10)

- **ka sehloohong**:

1. Tiisa mohlala oa tšebelisano, nako le moralo oa ts'ebetsong;

2. Saena konteraka ea molao.

Mohato oa Bobeli: Moralo oa Feme le Moralo (matsatsi a 30)

Litlhoko**

- ** Tekanyetso ea kaho ea feme ea UAV **:

Sebaka ≥ 4000㎡, bophahamo ≥ 4.5m;

-Power 500KVA, E na le phepelo ea motlakase ea bekapo (jenereithara ea dizeli kapa polokelo ea matla).

- **Sebaka sa tlhahlobo ea sefofane **:

- Runway bolelele 300-500 limithara;

- Ha ho na meaho e thibelang pono ka har'a radius ea 2km, phallo ea moea e tsitsitse mme ponahalo e ntle.

 

**Ts'ebetso ea ho phethahatsa**

1. **Tlhahlobo ea Sebaka**:

- Romella lienjiniere tsa motlakase tsa meaho le lienjineri tse ka sehloohong tsa feme bakeng sa tlhahlobo ea 'nete ea sebaka (matsatsi a 15);

- Motjhelete o hloka ho fana ka litšoantšo tsa CAD tsa sebaka sa marang-rang le basebetsi ba litsebi (ba tlamehang ho ba le boiphihlelo ba kaho ea feme le tsebo e ntle ea puisano ea Senyesemane).

2. **Sets'oants'o sa moralo **:

- Setsi sa meralo se tšoanelehang sa motho oa boraro se tla fana ka meralo ea fatše, tlhahiso le lethathamo la lisebelisoa (matsatsi a 15);

- Metako e tlameha ho kenyelletsa likarolo tsa lithupelo (sebaka sa polokelo, mohala oa tlhahiso, laboratori, joalo-joalo), metsi, motlakase le litsamaiso tsa ts'ireletso ea tikoloho le moralo oa sebaka sa lifofane.

Mohato oa Boraro: Koetliso ea basebetsi

Re tla fana ka koetliso ea mahala bakeng sa basebetsi ba latelang ho uena: 1 mookameli oa tlhahiso; 1 opareitara ea tekheniki bakeng sa lisebelisoa tse nepahetseng tsa mochini oa ho betla; 1 teko ea kopano; 1 mofofisi. U hloka ho khetha basebetsi ba nepahetseng ba tšoanelehang bakeng sa mosebetsi o lekanyelitsoeng, 'me u tla fana ka litšenyehelo tsohle tsa maeto le meputso nakong ea tšebelisano.

Mohato oa Bone: Setsi sa Tsamaiso ea Phatlalatso se thehiloe

** Ofisi, lisebelisoa, bolulo;

- **Basebeletsi ba Hlokehang**:

- 1-2 basebetsi ba lifofane ba sebakeng sa marang-rang (tekanyo ea koleche kapa ka holimo, ba nang le bokhoni ba lipuisano tsa phepelo);

- U tla lefa basebetsi ba hau Meputso le litšenyehelo tsa ts'ehetso ea letsatsi le letsatsi.

- **Boemo ba tshebetso**:

- Theko ea thepa e kopantsoeng, ho itloaetsa sistimi ea enjine, tšebelisano ea likarolo tsa mochini le taolo ea likamano tsa barekisi.

Mohato oa Bohlano: Ho reka le ho tsamaisa thepa ea fektheri le thepa (nako e hlokahalang: matsatsi a 80 + matsatsi a 45, matsatsi a 125 kaofela)

1. **Kaho ea feme **:

- U ikarabella bakeng sa kaho ea meaho, re fana ka tataiso e hole ea tekheniki;

- Nako ea kaho e tla ipapisa le tsoelo-pele ea mokha oa capital.

2. **Ho reka le ho kenya lisebelisoa **:

- Setsi sa phepelo ea thepa se tiisa lethathamo la lisebelisoa mme se phethela theko;

- Re tla romela litsebi tse peli ho fana ka tataiso sebakeng sa marang-rang mabapi le ho kenya le ho lokisa.

Mohato oa Botšelela: Nts'etsopele ea prototype, tlhahiso ea liteko le tlhahiso ea liteko ea mefuta e mecha ea UAV (Nako: matsatsi a 90)

- **UAV Sample**: 1 sampole ea e 'ngoe le e 'ngoe ea mefuta e 3 + sete e le 'ngoe ea hlobo + lisebelisoa (ho kenyeletsoa litšoantšo le litokomane tsa ts'ebetso ea tlhahiso);

 

Tlhokomeliso ea Bohlokoa: Kaha li-UAV tsa rona li bonahala ka ho hlaka, e le ho qoba ho beoa leihlo, re hloka ho li etsa liphetoho, ho li ntlafatsa le ho li etsa liteko. (Liphetoho life kapa life tsa boholo ba ponahalo le aerodynamics li hloka ho hlophisoa bocha) Sena se bolela hore mofuta ona ke mohlala o ikhethileng oa lehlakore la capital.

---

Mothati oa Bosupa: Feme e ncha e qala ho etsa tlhahiso ea liteko le sefofane sa tlhahlobo ea sehlahisoa sa hau UAV (Nako: matsatsi a 60)

1 - **Tlhahiso ea teko **:

- Re fana ka lienjiniere tse 4 (1 bakeng sa tsamaiso ea tlhahiso, litsebi tse 2 tse nang le tsebo e phahameng, 1 bakeng sa Debugging le ho kopanya UAV);

- Tlhahiso ea liteko fekthering ea hau e ncha e reretsoe haholo ho hlahisa mefuta e meraro ea UAV e tiisitsoeng le litlhaloso tse khutšoanyane tsa theknoloji tse amanang le tlhahiso, ho kenyeletsa: koetliso ea basebetsi ba tlhahiso, ho thehoa ha mokhoa oa tlhahiso ea tšireletso, moralo oa ts'ebetso ea tlhahiso, sebopeho sa mokhatlo oa tlhahiso le mohaho oa lefapha la tlhahiso; likhutšoane tsa ts'ebetso ea tekheniki, taolo ea taolo ea boleng le tse ling tse amanang le tlhahiso.

Khokahano ea 2-System le netefatso ea tlhahlobo ea sefofane (Nako: matsatsi a 60)

- ** Thepa ea ho lokisa bothata **: Lijenereithara, lisebelisoa tsa ho tjhaja, liteishene tsa fatše, software ea ho lokisa liphoso, software ea taolo ea sefofane;

- ** Pilot ea Teko**: Mofofisi oa sefofane a le mong + bathusi ba 2 (bathusi ba hloka ho koetlisoa fekthering e ncha).

Tlhokomeliso ea Bohlokoa: Kaha likarolo tsa lisebelisoa tsa sefofane ke lisebelisoa tse khethehileng, li hloka ts'ebetso ea CNC, anti-rust oxidation, sandblasting le mekhoa e meng. Ke theko e tlase empa e hloka litsebi tsa litsebi le lisebelisoa. kahoo likarolo tsena li hloka ho hloekisoa. Re tla fana ka lisebelisoa tsa ts'ebetso ea CNC ka theko e tlase bakeng sa tšehetso ea nako e telele. Khabareng, li-propeller le tsona li hloka ho rekoa fekthering ea China.