Comprehensive anti drone defense system Detector & Jammer & spoofer integrated equipment
Disclaimer and Warning
The Aero D2P System is a comprehensive platform Integrated Detection and jammer and navigation spoofing 3-in-1 System that rapidly identifies UAV / drone communication links, gathering information such as flight status, paths, and other information in real-time ("Monitoring Data"). Monitoring Data stream helps users make an informed response as soon as possible. Please note that Monitoring Data does not involve personal data of drone users. (Personal data is any information relating to an identified or identifiable natural person.) Unless pursuant to the requirement or request of any governmental or regulatory agency or court or tribunal of competent jurisdiction to the extent such disclosure is required by any valid laws, regulations, court orders or rules of relevant stock exchange, will not disclose any personal data that collect through Products and Services to third parties.
As a Aero D2P's end user, you represent and warrant that you are the eligible user of it. Examples of eligible users would be public safety organizations, law enforcement agencies, government agencies, regulatory bodies, and owners or operators of airports, power plants, and prisons; and you will use the System for monitoring public safety purpose only;and you will comply with any applicable laws concerning the use of t he System within the jurisdiction of operation; and you are solely responsible for the conductsof anyone that use the System through your account, which may include your employees, consultants or contractors, or the employees, consultants or contractors of your affiliates, which are companies or entities that you own, that own you, or that have the same owner or corporate parent as you.
You acknowledge and agree that do not help you comply with any laws, rules, or regulations that may apply to your use of Aero D2P, which is solely your responsibility; and shall not be liable for the authenticity of you; and will not be liable for any loss or damage you may cause; and you will defend, indemnify, and hold harmless, its affiliates, and it’s or their directors, officers, employees, agents, shareholders, successors and assigns from and against all claims, losses, damages, penalties, liability, and cost, including reasonable legal fees, of any kind or nature that are incurred in connection with or arising out of a third-party claim relating to, or arising from your breach of Purpose.
Function Descriptions
2.1 Basic
|
Function |
Descriptions |
|
UAV / drone detection |
Detection spectrum bandwidth: 70 MHZ - 6GHZ, detection focus on the 433Mhz、868Mhz、915Mhz、2.4Ghz、5.2Ghz、5.8Ghz FPV Detection：300Mhz-6.2Ghz Analog Signal of FPV Drones Simultaneous screening number of UAV: ≧150pcs The lowest detection height: ≤0 meters Detection rate: ≧99.99 %s |
|
Drones Location |
For UAVs with Remote ID (China GB42590-2023, US ASTM F3411-22a, EU ASD-STAN PrEN4709-002) and Drone ID (such as DJI Mavic2, Mavic3, air3s, Matrice4, etc., some require network decryption), it can parse detailed information such as drone location and pilot location. |
|
White and Blacklist |
The Systemcan identify ≧ 400 different model UAV including DJI series drones，and it has the autonomous learning ability. The Systemcan carry on the accurate identification of target, in-depth analysis of UAV signal, the identification of unique ID, and the black and whitelist to distinguish. Whitelist and a blacklist can be set for different targets of the same position, same frequency band, same manufacturer, same type of UAV respectively. |
|
Defensive Interference |
The Systemhas interference capabilities of 900MHz,1.2Ghz; 1.5Ghz, 2.4Ghz, 5.8Ghz; 5.2Ghz and other customized frequency bands, and covers most of the UAV communication available in market. |
|
GPS Spoofer |
Supports GPS, BDS, GLONASS, Galileo navigation satellite signal simulation, with 6 signal output frequency bands and channel numbers. |
|
Remote OAM |
After turning on the fully self-movable defense, it can enter unattended mode, detect, and strike autonomously. And a variety of OAM features are available when used with the remote server, including firmware updating, resetting, status inquiry, self-testing, parameter configuration, and more. |
|
GPS |
The Systemcan detect its current position using its built-in GPS. |
|
Networking |
The Systemcan network multiple devices through the cloud server, observe the online/abnormal status of each device, and control the device remotely through the mobile terminal (mobile phone IPAD), including but not limited to viewing the operating interface of the device system, receiving alarm information, viewing the black and whitelist, and turning on defense functions. |
|
Data security |
Use certificate management and data encryption between the equipment and server to ensure data reliability and security. |
2.2 Specs
1.Detection range: In an interference-free environment, signal reception range maybe vary when different antennas are used. the range of detection can up to 10km.
2.Detection spectrum bandwidth: 70 MHZ - 6GHZ, focus on the 433Mhz、868Mhz、915Mhz、2.4Ghz、5.2Ghz、5.8Ghz；
3.FPV Detection：300Mhz-6.2Ghz Analog Signal of FPV Drones，range up to 1-3km
4.Drones Location:For UAVs with Remote ID (China GB42590-2023, US ASTM F3411-22a, EU ASD-STAN PrEN4709-002) and Drone ID (such as DJI Mavic2, Mavic3, air3s, Matrice4, etc., some require network decryption), it can parse detailed information such as drone location and pilot location up to 3-5km.
5.Identify Range: LightBridgel, LightBridge2, Ocusync 1、2、3、4, WIFI and WIFI variant protocols, Zigbee, Bluetooth and other customized protocal of small brand, can identify UAV brands and models;
6.The trajectory: have the function for tracking flight trajectory.
7.Accurate recognition: it can accurately identify UAV model and electronic fingerprints (ID),≧ 400 different uavs models and the corresponding ID (identity) can be identify at the same time.
8.Detection Angle: 360 °
9.Detection number of UAV : ≧150pcs
10.The lowest detection height: ≤0 meters
11.Detection rate: ≧99.9%
12.Broadband Jamming: 800-900Mhz\1.2Ghz\1.5 GHz\2.4 GHz\5.1-5.2GHz\5.8GHz
13.support at the level of effective interception Angle range in a straight line dive and turned to flight of UAV, intercept distance: 2km;
14.System supports GPS, BDS, GLONASS, Galileo navigation satellite signal simulation, with the following signal output frequency bands and channel numbers: BDS B1I、GPS L1 C/A、GPS L2、GPS L5、GLONASS L1、GALILEO E1
15.Maximum GPS spoofer transmission power: ≥20w;
16.Maximum spoofing distance:3km
17.Gps spoofer Power on start-up time: 40s;
18.System power supply mode: 220 V±10V
19.System Protection grade: ≧IP65
20.System Working temperature: - 40 ℃ ~ + 55 ℃
Installation
3.1 Installation Notice
For better founction, it’s recommended that the system should be installed as high as possible on one building or some high place, in an environment free from radio interference, In an open place without physical shelter.
3.2 Lightning Protection
If System is not under System stationary unit system includes surge protection modules in the antenna module, power module, and Ethernet port. The Systemdoes not include a lightning induction system. It should be installed within the protected region of another lightning induction system. The protected region is calculated using the rolling sphere method.
The protection of the nearest lightning rod, a designated lightning induction system should be designed by a qualified professional.
Finally, be sure to note the following:
• Ensure that rainwater cannot flow along the Antenna cable into the D2pro.
• lf the pole is made of metal; the frame and the pole should be separated using insulation.
• Indoor power outlets must have surge protection.
• Indoor Ethernet outlets must have surge protection.
3.3 Power Supply
The System is designed to operate at 200~240 V, 50/60Hz, 2.5A Max and 50W in detection mode, 200~240 V, 50/60Hz, 2.5A Max and 500W in Jammer mode, The SystemPower Cable is used to connect the The System stationary unit to a power supply. In addition, it can also use DC power if necessary.3.3 Detector Set Interface
Below the device, there are a total of five interfaces, each corresponding to:
• LAN Port: Used for local area network (LAN) connection; by default, we insert the network cable into this port.
• WAN Port: Used for accessing the cloud server. Connection to this port must be made through the company's internal network and is not recommended for general use.
• RF: Used for debugging the device by our team. You don't need to use this port.
• AC IN: Power port: Please insert the power cord into this port.
• JAM: Used for connecting the jamming device. Once connected to the jamming box, you can jamming the drones.
• The Power button is the power on/off switch.
3.4 Jammer & Navigation Spoofer Parts
Packing List
Box 1:
• The SystemDetection part x 1
• Tripod x 1
• Power cable x 1
• Net cable x 1
• Data connection cable x 1
Box 2:
• The Jamming System x 1
• Jamming antenna x 6pcs
• Power cable x 1
• Jammer Mounting Screws pack x 1
Warranty and Service
1. We promise to ensure that the products provided are brand new and meet the factory standards. Its quality and specifications comply with the technical performance indicators of the product.
2. Warranty period: From the date of product delivery, we provide 1-year free hardware maintenance guarantee service. Damage caused by improper use and storage is excluded.
3. The product should be used in accordance with the original manufacturer’s use requirements, strictly in accordance with the product use requirements and relevant laws and regulations. If the product cannot be used normally due to illegal use or storage, poor maintenance, etc., the applicable room shall bear the relevant consequences.
4. Warranty scope: If there is a quality problem with this product, it needs to be sent back to the country for repair work or to the location designated for repair. During the warranty period, the purchaser shall pay for the round-trip international logistics costs of the equipment.
5. Regularly check whether the antenna and antenna interface connection is normal. When the device is running for a long time, restart the device once month.
6. For the interface that is not in use temporarily, please use the supporting equipment .
7. Regularly remove dust; Recommended storage environment for the device: normal temperature, dry environment.
FAQ
1.Q: Logged-in users are forced to log out of the system.
●A: The software license of the system is invalid, please contact our after-sales personnel to re-register the software license.
2.Q: Cannot detect.
●A: Log in with an account with superuser privileges.
3.Q: Device won't boot
●A: Check that the power cord is properly installed.
4.Q: unable to access normally.
●A: Check whether the network connection is normal.
5.Q: The device can not be located automatically.
●A: Check whether the GPS antenna is properly installed.
6.Q: Poor detection.
●A: Check whether the antenna is properly installed or not installed correctly.
●Choose an environment with less electromagnetic interference as much as possible. If there are metal buildings, shelters, and places with complex electromagnetic environments around the test, it will cause the detection distance to be too short or lost. It is recommended to find a clear and clean environment for testing; it is best to choose the highest point in urban areas to obtain the maximum coverage. Please follow the professional guidance of our company or partners.